Tips for proper application of paint on the walls of the kitchen

Sometimes the kitchen walls are painted in two colors, divided horizontally. In these cases, we have applied (stretch) panels - a thin strip of paint in width from 0.5 to 2 cm In order to evenly stretch panels, take advantage of advice: take the string along the length of the substrate, prokraste her any dry coloring composition (blue, stained and etc.). He came to equal height at the opposite ends of the room, with force pull the string, click it on the wall, subject to markup. Coloring of the string will record a straight line on which the cause panels. This operation is best performed alone.

The lower part of the wall surface is called the panel and its height is typically less than 1.8 m. Part of the wall, located above the panel, called a tapestry, a narrow strip between the tapestry and the panel - a frieze.

The panels in the kitchen most often painted in darker colors, because they are dirty. If you'd like to paint the panel points, or splashed. This can be done as follows: in the right hand, take great makhovaya brush. Before the surface of the wall at a certain distance, place a stick and hit her on the brush so that the spray from the blow fell on the wall.

When painting walls in this way you can use two or more different color tones, randomly splashing paint across the surface, which will give you the opportunity to get a unique decorative effect. On such a surface is less noticeable pollution.

If you want to get monotonous surface, dye alternately apply a thin layer of 2-3 hours. Covers only the dry wall. The new layer is applied to the previous just after he dries.

Tapestry taken to cover the lighter staggers over to the panel. If you want the picture on it, then apply it using a stencil or special rollers with decorative corrugated surface. Their you can buy in the store.

Frieze apply for decoration. It can be painted in color, contrast color panels or a tapestry. If you wish to be coated with a decorative tile or wooden slats. It should be borne in mind that a wide frieze makes the room visually lower than it really is.

Ready-to-use paint mix thoroughly. In the event that you are working with gustotertymi (pasty) paints, dilute their linseed oil (for oil paints) or water (for paints), and prior to use and mix well. If you want to combine several colors, each pre-mix the paint and strain. Remember that you can not mix different types of paints (for example, some types of enamel are not mixed with oil paint and water-soluble dyes).

For staining of walls, use brushes and rollers of various sizes. Form and choose a brush size depending on the size and shape of the walls or some of its stations. For painting a large surface area should use a large makhovaya brush, and for painting small areas, the surface needed a small front-end brush.

Brush down into the paint only up to half of the pile. Thus, the paint will not penetrate into its inner part, which would prolong the life of the brush, as the tool will not have long to keep in a solvent to wash the paint.

When painting surfaces try to make quick and accurate movement of a brush, so that did not have time to evaporate the solvent, and paint could well connect with the surface. New layer of paint is applied, overlapping the just painted surface to 3 cm Do this before the previous layer dry, then paint the border will be virtually unnoticeable.

For in the process of staining did not appear wrinkles and smudges, you need to press harder on the brush and hold it in the direction from top to bottom, evenly smearing the paint.

Using a roller requires special skill. First, lower the roller into the paint, then brush off the excess paint with it, tapped it on the metal grid is stretched over a shallow bucket or other container. After this roller spend 2-3 times the same place at the surface to bottom. With each new movement increases the pressure. Neighboring layer is applied to the overlap of the previous layer by about 3 cm

After staining the walls with oil paint, to make them more shiny, apply a thin layer of these special oil varnish.Varnish should be preheated, and cover them only dry wall.

Tips on buying a wardrobe

Before going to buy a wardrobe, think about where he will is located, measure the space in the house, where he was expected to be installed, determine the number and composition of the items that you intend to keep it (do not forget that over the years, the number of things usually increases so it is better to err on the design and order povmestitelnee).

You must know what you want to get the final result, as a future cabinet should look like, and clearly articulate their demands;

Better to do 2 sections under the clothing that will positively impact on a clearer division of clothing: the one you are using at the moment and the one where you will enjoy a certain time interval.

Also in the wardrobe should include at least one section under the shelves, there are always little things in the hallway, which must be where it folded.

Instead of the rear wall, side panels, floor or roof, you can use the walls, floor and ceiling of your room. This enables you to significantly reduce the cost of the cabinet.

Cabinet can be designed in such a way that it easily fits a bed, equipped with a lifting device. Very handy when you press the button and the bed lazily raised on pop and hides behind a mirrored surface.

Do not make the distance between the shelves for clothes more than 30-40 cm at this distance is enough to lay down your belongings.

Reasonable to hang two - one for short things, and one for long. This will save space for other things. If a lot of short things - you can arrange two hang over each other.

If wardrobe or linen, it is better to close its contents.

When you install the cross-hangers, it is better to put them on the contrary, ie without the possibility of rolling out at you, and soon you will realize that this is the right decision.

Wardrobe with lighting looks much more spectacular. However, the feeble light bulbs will not help you to better see what is inside the cabinet, the most that they are able to highlight - the contents of the upper shelves.

The library and drawing room suitable glass cabinet doors. Also in the living room are good open shelves, which will house musical equipment, books, vases.

If the glass you for any reason not satisfied, but you like the merry color inserts, you can use translucent frosted plastic. Usually, this somewhat reduces the price. In recent years become popular wicker inserts, which are particularly well looked at in a rustic style interiors.

On the mirror is not worth saving. They are appropriate in the narrow and dark room, able to visually enlarge the space, transforming the tiny hallway in a nice lounge.

Sliding doors with mirrors look bad in the living room.

Tinted mirrors are not suitable for dark rooms.

Never try to combine the wardrobe with a whimsical wooden furniture with inlaid and without, with heavy velvet curtains, any antiques, crystal chandeliers and bronze floor lamps. Exception, perhaps, are the model with veneered doors.

If you want to have a wardrobe that served as you would for a long time, choose a steel system, but if you want to your friends or acquaintances, and put a beautiful thing in the house (a kind work of art), choose an aluminum system.

The thicker the CPD, the more powerful, more reliable and solid looks wardrobe.

Do not forget to ask the material from which made the wheels chassis. Very well, if it is metal. Plastic with Teflon-coated, too reliable. And from the wheels of the clear plastic is better to refuse.

In the aluminum system rolls on ball bearings for smoother moves.

Not gone to the door rail at the ends and joints of wings usually glued shligel (with artificially small brush pile or a strip of foam rubber). Its mission also includes amortization of blows with a sharp opening doors. He does not fall inside the cabinet doors, even with a strong impact, especially important for glass doors. He cleaned mezhpazovoe space and take care of the surface of the door, benefit from them is enormous.

The slots and rollers should be periodically vacuumed.

"Evroshurupy" used to assemble cabinets in contrast to the usual places, they are almost unnoticeable and avoid gaps between the panels. Open shelves, thanks to this, looks neat.

The ends should be trimmed with a modern edge, the volume of PVC, which does not cleave, does not exfoliate and looks nice.

For the full assembly of the cabinet, with the ceiling, rear and side panels is better not to get involved. Ease of movement of doors and general appearance are often highly dependent not only on the brand, but also on the skill.

Do not believe companies that offer you a wardrobe for 1 day - it's just a publicity stunt. Hours of professional collectors depends on the size and complexity of the wardrobe and usually takes from one and a half to six hours.

Tips on buying leather furniture

Do not buy furniture only for a picture in the catalog. You should see at least one sample of the furniture factory. According to this model can be judged on the rest of the production plant, its quality. This, incidentally, also applies to other groups of furniture.

Do not order a set of parts (fold-out now chairs later). Color does not match ever.

Choosing furniture, note the number of samples of skin, which you predolagayut. A good plant to more than 30 (some killogrammov alone samples). It is better to buy furniture for those factories that specialize in the skin.Besides a wide choice of models, they are guaranteed good quality. There are, however, exceptions. Factory - the manufacturer can produce excellent products, using a few basic categories of skin (the most "sell" category and color). Therefore, the main criterion is the name of the manufacturer. For example, names such as "Allegro-Classic", "8 March", "MTS5", "Kalinka" and others speak for themselves.

Good expensive furniture is so-called "French" and a cot is not designed that will sleep on it.

Pay attention to detail, especially on the seams. The stitches should be neat, straight, with no "overlap", should not be "broken" (large, ragged holes from the needle). Neatness in the details distinguish the "good" products from "bad" and that the seams are the first indicator of quality. Also, fear of fraud, many manufacturers are deliberately complex, shaped seams which can not be played "pirates". Complex, neat seam - a sign of high quality.

If you are offered a very large discount (over 30%) from the Italian prices, so the price originally overstated.Large factories, selling a good furniture, do not give big discounts. They are pursuing a policy of uniform prices.

Sometimes beauty can offer a good discount on the exhibition design, if the salon is interested in replacing this obraztsana another (latest model). Feel free to buy.