Sort clothes in wardrobe

You want to order a wardrobe, or if you have long standing - in any case, read these tips for cleaning and sorting things, usually stored in cabinets. So, we have a little space in which we must put all clothes and anything else. To begin with, that will put all the things from wardrobe and put to bed (not touching the shelves and drawers - to them shall understand later). Take a look at each of the items taken out. Now organize the pile.

The first pile - clothes that you do not like, went out of fashion, bad for you sitting. If an item of clothing you like, but it is small (size 1-2) - gave him a separate package and do not be lazy to write the date - if after six months he nalezet you not, his place in the first pile - unnecessary things.

Now - the second stack. She - for seasonal items. Put those who now do not use (eg, winter clothes in summer). They can put a packed under the bed or in the closet, if it is fairly large. Make a label that is lying there.

The third pile - for your favorite items that require repair or any changes. Choose from those which actually you are going to fix the (altered) and add

The fourth pile - his favorite things that you will wear. Hang up and put them on the shelves according to category (skirts, trousers, shirts, jackets, shorts, etc.). In this case, use the advantages of hangers for short things, one above the other.

Now you will be easier to buy new things. You will be able to see firsthand what color clothes you have dominated, and what color clothes should buy to form yet another day off or working set of clothes. You will be able to plan their purchases, and thus save money.

We now turn to the small things that are usually stored in boxes. Put all the contents of boxes on a bed. Sort all the things in the likeness of major. Selecting those things that you like and discarding unnecessary, you lose your need to cram things into boxes. Now they lie so that they can be much less ironing. Particular care is required for cabinets or offices, lockers for children's belongings. In some children grow so fast that to pick cabinet should be in six months - 9 months. Separating a children's things, you can kill 2 birds with one stone: do not confuse their belongings and children, and teach the child to the accuracy, explaining that it's his thing and his cabinet. The children's department is to hang at eye level of the child, not adult. If you do not have wardrobe, and you want to order it - this sort of things will help you accurately determine how many offices, shelves, drawers, and put you. In very many cases, people only six months or a year after ordering the subject of case furniture understand what configuration cost to order that all things were made available the most economical and convenient.

Tips kitchen interior color scheme

Interior color can change the amount of room that is visually enlarge or reduce it. This is due to the physiological structure of the human eye. In terms of feeling the distance, all colors are divided into "retreating" (cold) and "acting" (warm). "Retreating" colors have the ability to increase the room, and "acting" - reduce. For example, if the furniture in the kitchen will prevail warm colors, the room will seem smaller. This ability can be used in the color design of a disproportionately large rooms with high ceilings. If the room is small, then it is recommended to purchase furniture, painted in green, blue, blue, violet and other cool colors.

To kitchen looked comfortable, you should also be able to properly combine the colors of furniture and other furnishings. There are several kinds of colors, which can be recommended for registration of premises.

The combination of contrasting colors

Typically, this type involves the combination in the same room as warm and cold tones and shades, and one of them may be the main (brighter), while others will be to complement and accompany him. To kitchen look elegant and cozy, you need to know what colors can be used in interior design room. Otherwise, the room will look tasteless and can cause psychological or even physical fatigue. So, if you like red, then with it flawlessly will combine green or blue. The latter will be well in tune with orange. If you like yellow color, it can be used in conjunction with light-purple or dark purple flowers.

A combination of shades of one color or colors are similar in location in the color circle

If the interior color scheme of your kitchen consists of shades of the same color, you need to remember that brighter and more saturated colors are suitable for furniture, and lighter - for a variety of accessories: vases, baskets of various sizes, clocks, curtains at the window, etc. d. The ceiling, walls and floor is recommended to be painted in lighter shades.

If, however, to design the kitchen to use color, closely spaced in the color wheel, then when they are allowed to join a combination of light and delicate shades of yellow, green, brown and other colors. It is important that they blend with each other. This color scheme must be used in interior design small kitchen. In this case, is especially recommended to use similar colors of the spectrum.

When combined in the interior of the room closest colors and shades you need to avoid overcrowding. The best option is to choose 1 main and 1-2 additional colors.

Combination of achromatic colors and their shades

Such combinations are called neutral. By achromatic tones are brown, black, gray and white colors. Contrast combination of black and white colors makes the room uninhabitable appearance. It is more suitable for commercial premises and offices. If the black and white flowers add gray, gray-blue or silver-gray, then so can be issued and living room, inter alia, the kitchen. In this case, you'd better buy furniture in black, and the walls, floor, ceiling and accessories can be issued a white or gray colors and shades.

When choosing an interior color solutions need to remember that many of the color when exposed to light can be changed, and eventually even burn (eg, green). Thus, if a large number of light blue, blue, purple and other shades of the spectrum are able to get dark, and the green, yellow, red and orange brighten.

In addition, the bright light color can change their colors. For example, a bright purple color becomes dark red, wine color, red is more saturated, yellow - lighter blue and loses its brightness.

Consider some examples of optimal designs kitchens.

If you decide to register your kitchen in cold tones with a predominance of green, then the tile should choose a light green or gray-green with pale pattern. Curtains suit pink or yellowish color with bright or pastel drawing. In case you are selected for the kitchen warm colors, the accessories, respectively, should be bright and saturated colors. Among them may be a contrasting color and tone of a scale.

If you decide to paint the ceiling to match the interior or okleit his wallpaper, then it must be remembered that it should be issued only in light colors because dark visually reduce the size of the room and create a feeling of closeness. They can be applied in cases where the apartment is very high ceilings (eg, in old houses and in houses built on an individual project).

Tips on caring for blind

How to support the blind "in the form"? How to make sure that they were long and looked perfectly? The easiest way to care for plastic and metal blinds. Suffice it to periodically wipe them with a damp cloth dipped in soapy water or powder, but metal can even scrub brush. Wooden blinds, wipe with a cloth and vacuumed.Threads which are fastened wooden parts, processed pylevlagoottalkivayuschey impregnated, so they do not care even a vacuum cleaner cleaning detergent. For shutters of the glass is only suitable dry cleaning.

The hardest thing to take care of fabric blinds. But inevitably in about a year (all depends on the quality of impregnation and of where they hang) they will have to clean. If you decide to take up the case itself, the flag in your hands. You must first remove the lower chain and remove the weights, then remove the runners themselves slats. This procedure is similar to the way the curtains are usually removed from the hooks. Each lamella twisted in the roll (to better maintain the shape, lamella can tie in cheesecloth) and dipped in soapy water or water with the powder. Do not rub the slats, but give them just lie. Once the dirt gone, slats removed and a wet hang in place. Under their weight and the weight of weights, they straighten and dry. If the fabric is not very high quality, fine, then after such a procedure, it can stretch out on the edges and lose shape. Therefore, when buying fabric blinds are not worth chasing cheapness.

One firm told me the story. When they have just started to work, to them a lady came and bought a light thin fabric blinds. Negligible sumnyashesya, sellers advised her to wash them when dirty. That one year removed from the eaves and slats, without removing the weights and other plastic parts, washed in the washing machine.After such a barbaric procedure to look at the slats was just painful - they are twisted and completely lost their shape. Now a sample of each tissue lamella employees of the company as an experiment must be washed by hand, dried, and see what it happens to know exactly how it will look after washing.

However, this procedure seemed to me very difficult and time consuming. I reasoned: if the blinds fabric is so popular, you are likely to be firms that their professionally cleaned. I had to sit down the phone. Almost everywhere I called, these companies heard something. I said: Yes, these companies really is, and someone from customers even use their services, but no telephones, no name or address could not. And yet I was lucky.I found. Two firms. True, the first immediately warned that they are engaged in cleaning venetian blinds in an industrial scale. If the area of blinds in your office more than 30 m, then you will come to a team of brave masters with chemicals and special equipment and quickly cleans all. The cost of this service - 40 rubles per square meter. Second firm serves individual orders. By calling a person arrives, takes blinds, takes them two days back clean. Price - $ 2 per sq. This version I liked more. At least do not have to breathe the dirtiest. But alas, I was bitterly disappointed. It turned out that the minimum area of tissue, which would undertake to clean the company - not less than 25 sq ft! I, of course, the area of windows is much smaller. What to do? As I hinted, way out there. Paying $ 50 - and you cleaned at least 1 meter. So decide what you prefer - do postirushkoy independently or part with half a ruble.

Tips for installing a toilet bowl

Ceramic bowls placed on concrete or tiled floors and fastened with dowels, screws, or by sticking to the floor.Between the floor and the toilet are paving the rubber sheet with a hole for passage of a direct issuance of the toilet. Also permissible to mount toilet screws taffeta - a wooden board with a hole for the bell, clamped to the concrete.

Toilet bowl set as follows. Graduation sprout with external grooves smeared divorced in drying oil and red lead him tightly wound pitch strand. When winding a strand of not finishing the appendix of 3-4 mm to the ends of its falling into the hole process and not caused pollution.

Then lock promazyvayut top red lead, and toilet set a release processes in the bell. Check your installation toilet, it screws with screws to the studs. Screws need to screw up carefully so as not to chip the edge toilet attached to taffeta, to tighten the screws smeared axle grease. Under head screws enclose a piece of leather or rubber and metal washer.

Flush tank is mounted to the installation of a toilet bowl by two screws. Screws are mounted on the wall in the dowels so that the tank was strictly horizontally. Before installing the cistern to him on the floor has added flushing pipe diameter of 32 mm. The other end of the flushing pipes were coated with red lead and wrapped in linen strands which were coated with red lead from the top, too. At the end of the pipe wear rubber cuff, which is tied to the tube a thin wire. The other end wrench and tighten the cuffs on the pipe.

A wooden seat is bolted directly to the toilet. K underside of the seat screws, rubber buferki, protecting a toilet seat from damage during the fall of the seat.

When installing the Dish bowl with direct release of Issue toilet to connect directly with the funnel outlet pipe, which should be removed flush with the floor.

Installing Dish bowl with an oblique issue and vysokoraspolagaemym tank and adherence to the toilet water and sewer rising mains located in the sanitary blocks, or to the risers, located in the furrows of the wall are shown in the figure. The toilet bowl is installed in accordance with the mounting dimensions shown in the drawing.

Installing Dish bowl with the release of an oblique angle of 30 ° and extended shelf directly connected with the flushing toilet "Compact" is shown in the figure. Flushing cistern mounted on an elongated toilet ledge with two bolts. By the toilet privertyvayut special fittings for attaching the seat.

Installing Dish toilet with low-flushing toilet

Plate bowls with the release angle of 30 ° can connect to the sewage network in two ways. One way, when the toilet has added two-scene to a tee, which is part of the sewer risers. Another way is that the toilet to the sewage network associated with reduced tee, which is part of the outlet line. In the latter case, a toilet set with a slope of sewer risers.

The toilet bowl can be installed with the laying of the outlet pipe above the floor is open or plinth.

For fixing toilets to tile and concrete floors are widely used epoxy glue. Glue is applied to the bearing surface of a metal spatula toilet in four places on the corners in such a way that the total glued area was not less than 20 cm2. The thickness of the adhesive should be 4-5 mm. Then set the pan on the floor and pressed tightly to him.To ensure the necessary strength glue, toilet seats should be in a state of rest at least 10-12 hours

Surfaces are preparing to install toilets with the electrified instrument. During the processing of this tool to prepare the surface of corundum stone cause roughness, which contribute to a better adhesion toilets.

When using epoxy glue is necessary to perform the following safety rules: the premises, which shall be charged pipes should be equipped with ventilation system with a triple exchange of air in the room where the use of epoxy glue, is not permitted to store and eating, when working with glue to use protective paste for the hands, rubber gloves or mittens.

Skin hardener or finished adhesive wound site should be wiped with acetone, and then rinse with warm water.After working with glue, as well as during recess, you must wash your hands with warm water and soap.

Tips for installing windows

Install glass in windows and fasten the cover bead-mi or bolts. To consolidate the glass, use only small nails and studs. Peg should be in the side of the seam every 25 cm in such a way that they went slightly up from the glass or along its surface. If you drive nails or studs below the window, they are poorly prizhmut him to the rebate and the glass will stay poor. And besides, pins or nails, pushing the edge of the glass can damage it.

Hammer nails and studs sliding blows with slick, so that they did not go over the edge of the seam and can be sealed with putty, which will protect them from the action of water.

Rolling into which is inserted into the glass, pre promazhte soft putty. Once you insert the glass, the excess putty will come out, and between the rebate and the glass left her small layer. Glass Reinforce hairpins, and folds back cover with putty. Its gently apply a chisel or putty knife. Once the putty has dried, cover the entire window frame on the outside with water resistant varnish.

From time to time to check the putty and where it is cracked, remove it with a knife with a blunt end, causing it to place fresh. If there is no ready-made plaster, it is possible to make yourself.

Tips for installing a window unit

Before you install a window unit, using levels, on both sides of the vent check the bottom of the window. Then on the sides of the opening, retiring 15 cm from its slopes, place the wooden wedges. Then install the window assembly in the frame and secure with screws in the field of wooden wedges. To drill holes for mounting, take a drill diameter of 1.3 cm

Outside window frame insert before will be fully completed assembly of the window. This must be done in order to be able to change, adjust the gaps between the frame and the frame.

If the height of window units not exceeding 90 cm, then attach them to two screws on each side, if more than 90 cm - screws, located at every 60 cm wide windows, attach the top and on the sections of joints blocks. In addition to screws, mounting blocks, you can use nails.

Tips for repairing the ceiling in the kitchen

There are 2 ways to change the ceiling coverings: update the old or make new. But in any case must first be completely clean the surface: dilute whitewash, remove wallpaper or textiles, remove the old tile. Then soak the ceiling and Cleaning of its cycle, completely smooth the surface.

In the kitchen, in the place where food is prepared, on the ceiling and the genes often accumulates soot, soot, rust, which is poorly removed during wash. For better cleaning of the ceiling, you can resort to one of the following: prepare a solution of water and copper sulfate. If you need normal strength, 5 liters of hot water, take 200 grams of sulphate. If soot old and deeply ingrained, prepare a strong solution: 300 g (with an average degree of pollution) or 500 g (high strength) to 5 liters of water. The solution was then filter, heating to 70 C and apply on rusty or sooty place 1-3 times. After drying the surface 1-2 times cover the ceiling of primer (it is sold in stores).

You can also process a dingy place with 2% hydrochloric acid, followed by a rinse everything clean with hot water. After the final drying zagruntuyte entire surface. When working with hydrochloric acid to work in rubber gloves.

If the ceiling is very dirty, rinse it acid solution, after which the usual costs involved with lime mortar, prepared to fine sand. If the roof leaked for a long time, and the ceiling is not possible to remove rusty spots of any of the above methods, you should remove the old plaster in these places entirely to overlap, and apply a new one.

After cleaning the ceiling begin to actually finish: whitewashed, coloring and sticker tiles, wallpaper or textile or upholstery rack.

Tips for repairing doors

One of the common defects of the old doors (or poorly fortified new) - shattered box. In this case, it should be strengthened.

First of all you need to install a box so that the relevant part of it evened out vertically and horizontally. This is best done with the help of wedges that you want to score between the wall and frame, temporarily fixing the latest in the doorway. Then attach the box with each side in three places: one at 1 m from the floor, the rest at a distance of 30-40 cm from the top and bottom of the box. To do this, drill a hole in the wall not less than 5 cm and they Drive in wooden plugs, then check the box and nail to the cork with thick nails. This nail head should be recessed into the timber to 2-3 mm.

The door frame should fit snugly in the doorway. If, however, between it and the ends of the wall space left, the box will hang only on nails, why quickly loosen. To prevent this from happening, type in a slot rack, pre-fitted in thickness, after which the remaining flaws zamazhte solution. You can also fill up the space fast-mortar - plaster or hy-sotsementnym. When the solution dries, attach trim.

If the door squeaks, it is necessary to raise it slightly upward with the handle of a hammer, ax, or scrap metal, and hinges lubricated with machine oil or pork fat. Can a crack elevated loop to put a small piece of graphite from a pencil. Graphite razotretsya in powder and will long serve as an excellent lubricant.

After that, the door should be repeatedly opened and closed until the grease is not distributed along the axes of hinges. Then lower the door and set it in the normal position.

If the door is stuck, we must first check whether it is well locked. If the door only touches the floor, enough to lift it to 1-2 mm, putting on the hinge metal shaybochki. If not, you can replace them with wire from a solid alloy, winding it on a metal rod with a diameter equal to the diameter of the loop. In this case the door must be removed from its hinges, lubricate hinges and after the establishment of the washer or wire again put in place.

A small door in the jamb jamming can be eliminated by treating the friction surface of soap. If that is not enough, will have to remove the door off its hinges and handle ends of the plane.

If the door touches the floor, on a thin piece of wood glued a large skin and placed under the door. Several motions door tries stesat the lower part. If that does not have to take the door off its hinges and podstrogat place that touches the floor.

If the door down, this is usually to blame a weak attachment loops. To address this shortcoming, how to screw up enough screws.

Swollen door (this usually happens in wet areas), as well as the floor can be lightly podstrogat. This, however, should be done very carefully, so after drying room was not large cracks.

If the door is clamped to the bottom or top of the side jamb, this may be to blame himself old jamb. We must strike at him several times through a wooden block with a hammer or heavy mallet.

If the door closes tightly, it may be the cause of drafts. In this case, it is recommended to fix the edge of a very thin strips, pre-polished sandpaper and painted the color of the door.

If the door is always open itself, you can nail to the door jamb seal a piece of skin. True, he wears quite quickly, but in this case, the surface can be covered with a layer of paint, and the door will once again be tightly closed.

If the door panels of a crack from the cracks, they need to be repaired again. Crack which does not exceed 1,5-2 mm, can be eliminated with the help of an oil filler. To do this they must first clear and proolifit. If the cracks are large, they can cement the wood inserts (required of dry wood).

If the door lock shaken, so holes through which screw on, expanded. Need to remove the support screws, fill the holes with wooden chips or matches and then screw the screws again.

Cooking Tips putty

Mix 1.5 kg of dry sifted chalk and 30 g of natural linseed oil or flaxseed oil. You can also add 500 g of dry white lead. As a result, should get a stick to hands doughy mass. Place the putty in the lower folds and insert them in the glass.

To putty could mend all the window slit, it should be hands knead like dough, and roll out a wooden rolling pin on the board until such time until the mixture becomes plastic and homogenous. Properly prepared cement does not stick to hands and if it roll into a thin sausage, easily stretched. Sealant can be placed in water or wax paper - so it can maintain its quality for a very long time.

You can prepare the putty different colors, using white, red lead paint and other paints.

Tips for proper application of paint on the walls of the kitchen

Sometimes the kitchen walls are painted in two colors, divided horizontally. In these cases, we have applied (stretch) panels - a thin strip of paint in width from 0.5 to 2 cm In order to evenly stretch panels, take advantage of advice: take the string along the length of the substrate, prokraste her any dry coloring composition (blue, stained and etc.). He came to equal height at the opposite ends of the room, with force pull the string, click it on the wall, subject to markup. Coloring of the string will record a straight line on which the cause panels. This operation is best performed alone.

The lower part of the wall surface is called the panel and its height is typically less than 1.8 m. Part of the wall, located above the panel, called a tapestry, a narrow strip between the tapestry and the panel - a frieze.

The panels in the kitchen most often painted in darker colors, because they are dirty. If you'd like to paint the panel points, or splashed. This can be done as follows: in the right hand, take great makhovaya brush. Before the surface of the wall at a certain distance, place a stick and hit her on the brush so that the spray from the blow fell on the wall.

When painting walls in this way you can use two or more different color tones, randomly splashing paint across the surface, which will give you the opportunity to get a unique decorative effect. On such a surface is less noticeable pollution.

If you want to get monotonous surface, dye alternately apply a thin layer of 2-3 hours. Covers only the dry wall. The new layer is applied to the previous just after he dries.

Tapestry taken to cover the lighter staggers over to the panel. If you want the picture on it, then apply it using a stencil or special rollers with decorative corrugated surface. Their you can buy in the store.

Frieze apply for decoration. It can be painted in color, contrast color panels or a tapestry. If you wish to be coated with a decorative tile or wooden slats. It should be borne in mind that a wide frieze makes the room visually lower than it really is.

Ready-to-use paint mix thoroughly. In the event that you are working with gustotertymi (pasty) paints, dilute their linseed oil (for oil paints) or water (for paints), and prior to use and mix well. If you want to combine several colors, each pre-mix the paint and strain. Remember that you can not mix different types of paints (for example, some types of enamel are not mixed with oil paint and water-soluble dyes).

For staining of walls, use brushes and rollers of various sizes. Form and choose a brush size depending on the size and shape of the walls or some of its stations. For painting a large surface area should use a large makhovaya brush, and for painting small areas, the surface needed a small front-end brush.

Brush down into the paint only up to half of the pile. Thus, the paint will not penetrate into its inner part, which would prolong the life of the brush, as the tool will not have long to keep in a solvent to wash the paint.

When painting surfaces try to make quick and accurate movement of a brush, so that did not have time to evaporate the solvent, and paint could well connect with the surface. New layer of paint is applied, overlapping the just painted surface to 3 cm Do this before the previous layer dry, then paint the border will be virtually unnoticeable.

For in the process of staining did not appear wrinkles and smudges, you need to press harder on the brush and hold it in the direction from top to bottom, evenly smearing the paint.

Using a roller requires special skill. First, lower the roller into the paint, then brush off the excess paint with it, tapped it on the metal grid is stretched over a shallow bucket or other container. After this roller spend 2-3 times the same place at the surface to bottom. With each new movement increases the pressure. Neighboring layer is applied to the overlap of the previous layer by about 3 cm

After staining the walls with oil paint, to make them more shiny, apply a thin layer of these special oil varnish.Varnish should be preheated, and cover them only dry wall.

Tips on buying a wardrobe

Before going to buy a wardrobe, think about where he will is located, measure the space in the house, where he was expected to be installed, determine the number and composition of the items that you intend to keep it (do not forget that over the years, the number of things usually increases so it is better to err on the design and order povmestitelnee).

You must know what you want to get the final result, as a future cabinet should look like, and clearly articulate their demands;

Better to do 2 sections under the clothing that will positively impact on a clearer division of clothing: the one you are using at the moment and the one where you will enjoy a certain time interval.

Also in the wardrobe should include at least one section under the shelves, there are always little things in the hallway, which must be where it folded.

Instead of the rear wall, side panels, floor or roof, you can use the walls, floor and ceiling of your room. This enables you to significantly reduce the cost of the cabinet.

Cabinet can be designed in such a way that it easily fits a bed, equipped with a lifting device. Very handy when you press the button and the bed lazily raised on pop and hides behind a mirrored surface.

Do not make the distance between the shelves for clothes more than 30-40 cm at this distance is enough to lay down your belongings.

Reasonable to hang two - one for short things, and one for long. This will save space for other things. If a lot of short things - you can arrange two hang over each other.

If wardrobe or linen, it is better to close its contents.

When you install the cross-hangers, it is better to put them on the contrary, ie without the possibility of rolling out at you, and soon you will realize that this is the right decision.

Wardrobe with lighting looks much more spectacular. However, the feeble light bulbs will not help you to better see what is inside the cabinet, the most that they are able to highlight - the contents of the upper shelves.

The library and drawing room suitable glass cabinet doors. Also in the living room are good open shelves, which will house musical equipment, books, vases.

If the glass you for any reason not satisfied, but you like the merry color inserts, you can use translucent frosted plastic. Usually, this somewhat reduces the price. In recent years become popular wicker inserts, which are particularly well looked at in a rustic style interiors.

On the mirror is not worth saving. They are appropriate in the narrow and dark room, able to visually enlarge the space, transforming the tiny hallway in a nice lounge.

Sliding doors with mirrors look bad in the living room.

Tinted mirrors are not suitable for dark rooms.

Never try to combine the wardrobe with a whimsical wooden furniture with inlaid and without, with heavy velvet curtains, any antiques, crystal chandeliers and bronze floor lamps. Exception, perhaps, are the model with veneered doors.

If you want to have a wardrobe that served as you would for a long time, choose a steel system, but if you want to your friends or acquaintances, and put a beautiful thing in the house (a kind work of art), choose an aluminum system.

The thicker the CPD, the more powerful, more reliable and solid looks wardrobe.

Do not forget to ask the material from which made the wheels chassis. Very well, if it is metal. Plastic with Teflon-coated, too reliable. And from the wheels of the clear plastic is better to refuse.

In the aluminum system rolls on ball bearings for smoother moves.

Not gone to the door rail at the ends and joints of wings usually glued shligel (with artificially small brush pile or a strip of foam rubber). Its mission also includes amortization of blows with a sharp opening doors. He does not fall inside the cabinet doors, even with a strong impact, especially important for glass doors. He cleaned mezhpazovoe space and take care of the surface of the door, benefit from them is enormous.

The slots and rollers should be periodically vacuumed.

"Evroshurupy" used to assemble cabinets in contrast to the usual places, they are almost unnoticeable and avoid gaps between the panels. Open shelves, thanks to this, looks neat.

The ends should be trimmed with a modern edge, the volume of PVC, which does not cleave, does not exfoliate and looks nice.

For the full assembly of the cabinet, with the ceiling, rear and side panels is better not to get involved. Ease of movement of doors and general appearance are often highly dependent not only on the brand, but also on the skill.

Do not believe companies that offer you a wardrobe for 1 day - it's just a publicity stunt. Hours of professional collectors depends on the size and complexity of the wardrobe and usually takes from one and a half to six hours.