Tips on choosing tile

The most basic criterion for selecting decorative material - is the appointment of the premises.
You can not use the same tile for facing different rooms, not to mention finishing the facades or paving, so the first question: what are the performance characteristics must have a facing material in the light of conditions prevailing in this particular room.

Obviously, bathroom and kitchen - rooms with high humidity, so facing them is not suitable gypsum tile or tiles of hygroscopic rocks. Also in the kitchen there is always the risk of contact with the lining of chemically active substances such as grease, oil, organic acids, which also must be considered when choosing wall tiles.

For lining in a place with high mechanical stress, for example, sex in the stairwell or hallway, you should choose ceramic tiles with durable materials such as ceramic granite or natural stone of volcanic origin.
And for the exterior cladding works good only frost-resistant materials with high resistance to aggressive atmospheric influences. Ignoring the analysis of operating conditions facing the coating often runs the risk of their speedy destruction, even if you chose ceramic tile itself is distinguished by high technical characteristics.She just picked out of place.
On the other hand, do not use tiles with the operating parameters that are not needed, redundant. In this case, you risk throwing your money away by paying for a useless appendage in the form of frost resistance, water resistance, impact resistance, etc., which are not required for the cladding.

Frost-resistant tiles for a well-heated room - too much waste, as well as water-resistant tiles - for the living room.Instead, hoping to receive a very cheap tile indicate why it is so little worth. Perhaps the reason is that the terms of its application is too narrow and not consistent. When choosing tile for tile floor covering must be guided not only beauty but also practical.
Consider the fact that it will have to walk.
By the way, what shoes you plan to walk on the floor tiles: in sneakers or boots?

Tile floor in the hallway should have greater endurance than the floor tiles in the bathroom. Finally, consider this question, and is suitable in general to tile cladding for the premises. Despite the undeniable merits, starting and ending with the beauty of ease of care, tile or stone cladding hardly appropriate in the bedroom or child: it lacks the warmth and comfort. Still, this material is more suitable for those premises where we are not too much time.

Ceramic tiles hallway

Hallway serves as a link between the street and a flat. This means that here we get into the dirty and often wet shoes. It is also a room with heavy traffic. Therefore, floor tiles in the hallway should have a high mechanical strength, high abrasion resistance, low water absorption and a high coefficient of friction. So more of the other parameters satisfy unglazed porcelain tiles, vinyl tile and glazed tile with a dense tonkokeramicheskoy structure. An important requirement for floor tiles is the ease of cleaning and resistance to chemicals, through which you will need to regularly remove the dirt. Note that a tile with embossed front surface harder to clean than smooth. should pay attention to the look of tile, which in this case is an important component of informed choice. The front surface should be matte, unglazed, preferably dark or grainy coloring, where the mud will be evident. In light or monochromatic tile traces of wear and tear will be especially noticeable. We do not recommend black tiles, as well as her apparent even small scratches and chips, not to mention the white divorces. Also undesirable tiles with shiny surface, which is rapidly pales in places the greatest mechanical stress. In addition to the shiny surface is clearly visible scratches and other damage to the glaze.

Glazed tiles for bathroom

Facing - ideal for bathrooms of any size. Tile blends well with a cold faience sanitary appliances, chrome faucets and fluffy towels. Against the background facing surface advantageously look small trinkets and Vaneau-bath accessories. For facing the bathroom ceramic tiles used in low water absorption and high chemical resistance. The most optimal variant of a decorative wall finishing in places exposed to steam and water - a glass or glazed tiles tonkokeramicheskaya extrusion. water-resistant tiles can revet all vertical surfaces bathroom or only a small area (eg, walk-in shower) . In areas of direct contact with water, it is better to use a large tile size. In this way you reduce the amount mezhplitochnyh joints that represent the most vulnerable places facing, even when the suture line of water-resistant filler. Floor covering in the bathroom should be made of a matte, slightly rough tiles, as well as the union of a smooth glossy floor and water - not the safest for your health.

Ceramic tiles for kitchen

For facing the kitchen is suitable both glazed and unglazed tile, with a variety of ornaments (mostly from the "kitchen" theme: the image of dishes, fruits, vegetables, cutlery ...) and uneven texture. Also suitable coarse earthenware, made by hand (such as cotto tiles. Floor tiles should be particularly strong, water resistant, with improved mechanical and chemical characteristics. This category includes vinyl and ceramic tile. The most vulnerable areas, prone, most aggressive influences (on the kitchen floor, sink and refrigerator), require decoration from a chemically inert material. For the walls of the kitchen fit water-resistant glazed tile with a dense structure and high chemical resistance. It should be less strong than for sex, as well as mechanical loads on the vertical lining minimal. For tabletops and windowsills shown water-resistant, chemically inert jets "not sensitive to high temperatures and sudden temperature fluctuations.