There are 2 ways to change the ceiling coverings: update the old or make new. But in any case must first be completely clean the surface: dilute whitewash, remove wallpaper or textiles, remove the old tile. Then soak the ceiling and Cleaning of its cycle, completely smooth the surface.
In the kitchen, in the place where food is prepared, on the ceiling and the genes often accumulates soot, soot, rust, which is poorly removed during wash. For better cleaning of the ceiling, you can resort to one of the following: prepare a solution of water and copper sulfate. If you need normal strength, 5 liters of hot water, take 200 grams of sulphate. If soot old and deeply ingrained, prepare a strong solution: 300 g (with an average degree of pollution) or 500 g (high strength) to 5 liters of water. The solution was then filter, heating to 70 C and apply on rusty or sooty place 1-3 times. After drying the surface 1-2 times cover the ceiling of primer (it is sold in stores).
You can also process a dingy place with 2% hydrochloric acid, followed by a rinse everything clean with hot water. After the final drying zagruntuyte entire surface. When working with hydrochloric acid to work in rubber gloves.
If the ceiling is very dirty, rinse it acid solution, after which the usual costs involved with lime mortar, prepared to fine sand. If the roof leaked for a long time, and the ceiling is not possible to remove rusty spots of any of the above methods, you should remove the old plaster in these places entirely to overlap, and apply a new one.
After cleaning the ceiling begin to actually finish: whitewashed, coloring and sticker tiles, wallpaper or textile or upholstery rack.
Wednesday, October 14, 2009
Tips for repairing the ceiling in the kitchen
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment