Tips for finishing the walls with plastic panels

Plastic is an excellent finishing material for walls. He has such properties as water-and airtight, long life and decorative. Plastic is convenient because it can be fastened to almost any surface, such as plaster, stone, wood, concrete, metal. It comes in the form of film and wallpaper in different colors and shades. However, the plastic is combustible and fragile: in the field gapping it may be deformed, in this case to repair it, you will not succeed.

The surface of the plastic trim before you need to prepare: you should make sure that it is completely flat and smooth, dry and hard. After inspecting the walls, you can start wrapping. Cut plastic sheets to the desired size and lay on the floor. Then apply a thin layer on the wrong side of the wall of plastic and versatile PVA glue, then attach the sheet to the wall. Seams between sheets cover decorative wooden slats or planks.

If you are treating the walls you are using a rolled plastic, it should expand the roll on the floor and squeeze it for a while sandbags to plastic straightened. Then cut it into sheets of desired length, which lay on the floor face down. Then they apply the glue. Sheets can be folded in half and leave the sodden glue.

Once the sheets impregnated, glue them to the wall. If the surface of the wall is not sufficiently smooth, then it should also be pre-lubricated with glue. The seams between strips of plastic film, close wooden rods.