Tips for installing windows

Install glass in windows and fasten the cover bead-mi or bolts. To consolidate the glass, use only small nails and studs. Peg should be in the side of the seam every 25 cm in such a way that they went slightly up from the glass or along its surface. If you drive nails or studs below the window, they are poorly prizhmut him to the rebate and the glass will stay poor. And besides, pins or nails, pushing the edge of the glass can damage it.

Hammer nails and studs sliding blows with slick, so that they did not go over the edge of the seam and can be sealed with putty, which will protect them from the action of water.

Rolling into which is inserted into the glass, pre promazhte soft putty. Once you insert the glass, the excess putty will come out, and between the rebate and the glass left her small layer. Glass Reinforce hairpins, and folds back cover with putty. Its gently apply a chisel or putty knife. Once the putty has dried, cover the entire window frame on the outside with water resistant varnish.

From time to time to check the putty and where it is cracked, remove it with a knife with a blunt end, causing it to place fresh. If there is no ready-made plaster, it is possible to make yourself.