Tips pasting ceiling kitchen wallpaper

If the kitchen is equipped with a good ventilation system, the ceiling it can okleit wallpaper. For ceiling wallpaper is best to choose light, monochromatic or with indistinguishable pattern.

Figure try to trim carefully, because it alters the visual perception of space. For example, not all images are suitable for finishing the ceiling (broad band, cell, a bright floral pattern may cause negative associations). Type figure (geometric, floral, etc.) and the scale of his rapport must comply with the proportions and size of the room. In addition, working with a pattern more complex, it requires the utmost precision and accuracy.

Before pasting wallpaper, prepare them to work. This process includes the trimming of edges, if any, and the cutting of rolls of fabric the desired length.
Thin wallpaper glue overlap, so the edge prune just one side. Desktop medium and high density stick butt, hence, prune them to the edge on both sides.

Now import manufacturers make wallpaper completely without edge, so when cutting the wallpaper on the cloth watch coincidence pattern at the joints. By cutting the wallpaper, do not forget to add in excess of 5-10 cm, to create an overlap on the wall. This will hide irregularities ceiling heights and help smoother paste frieze.

Prepared the wallpaper, lay them face down on a pile of newspapers laid by clean floor. Roller or brush pit even layer apply the glue on the back side of the flag and fold it in half the glue inside out - this will enable uniform soaking glue layer. After the fold cloth again and leave for 5-10 minutes for soaking. Keep in mind, the greater the density of wallpaper, the more time they require to impregnate (but not more than 20 minutes).

Wallpaper on the ceiling is best to stick with an assistant, using chairs or goats. If you want to apply wallpaper overlap, then do it in the direction of the door to the window - the light will slide on the cloth and will not lap up highlights the field combine them. If the wallpaper is no edge, glue them to be in any direction, you only need to follow the exact combination of drawing at the joints.

Do this in the following order: disconnect the ends of the cloth, hold the one edge of the ceiling in place adjoin it to the wall. Assistant clean brush, roller or mop with a foam edge to smooth the remaining cloth along the entire length, retreating by about 1 pm Then flatten the remainder of the ceiling.

For a smooth bonded wallpaper on the ceiling, draw two straight lines. This will help you to correctly position the first panel - it is for him align all the others. It is best to stick strictly first panel in the center of the ceiling and from him have to wrapping room to both sides. But this is permissible only if the wallpaper is no edge.