Tips how to glue glass wall

The most massive use of Russia found in fiberglass wallpaper. Several years ago, when Moscow began office boom, this technology was brought to our foreign construction firms. Then the glass wall have appeared in all stores of building materials and now includes in their standard range.

In the Nordic countries, glass fiber widely used in private homes, but in Russia there was already a public image of o material, so we can hardly expect its penetration into private housing.

The starting material for the glass wall is a special glass, from which at 1200 ° C, stretched strings, they are woven into thick fibers and processed in a particular tissue. Fiberglass does not burn, so the material shall be non-combustible and flammable bad, depending on the use of glues and paints. Glass fiber resistant to micro-organisms, are neutral in relation to chemicals, they are not afraid of water and smoke. Strength of the fabric is so high that allows you to close the small cracks in the plaster.

Glass gives additional rigidity light coating sensitive to shocks and jolts, such as slabs of drywall or rigid foam.Surface after application of glass fiber is strong and not showered, it can twist the screws and hammer nails.

Without significance factor hygiene and environmental glass wall. Underlying steklopryazhi are only natural raw materials: quartz sand, soda, lime and dolomite - no toxic components! No breeding ground for microorganisms or parasites (eg ticks, bedbugs). The electrostatic charge is not formed. The open structure of the fabric contributes to snare a natural steam diffusion. Thus, we remove the most frequent causes of allergies in humans.

Glass fiber supplied in rolls 50 m long and 1m wide. Consumers are offered a variety of fibrous structures and drawings. When you are guided by the rule: the smaller the room, the thinner the pattern and texture of wallpaper. With the glass wall can solve the problem of unification of the surface buildings of the old buildings, where repairs were carried out repeatedly in the same room can meet the walls of different materials: bricks, plasterboard, particleboard, etc. After wallpapering and painting all the different bases is resolved, the cracks disappear. Another important factor is that steklooboyami convenient plaster door, door built-in cabinets and other furniture - that can be used for repairs in the apartment, and at the dacha.

Appliances bonded

Basis for fiberglass wall must be pre-processed so that it was clean, smooth, firm and suitable for gluing.Wallpapers well cut with scissors, and a mock knife. Must be retained allowance of 5-10 cm Special glue for fiberglass is applied directly to the wall with the roller. On highly absorbent surfaces applied glue, diluted with water. For once the glue is applied to one piece of cloth. As soon as the glue is placed on the cloth wallpaper and smoothed soft roller.

It is important not to damage the edge of the fabric. If this happens, then the edge to cut with a knife with a ruler. Cloth glued back to back, but should be ensured coincidence of the structural pattern on the neighboring paintings.

After sticking to the surface of glass fiber is applied diluted with water, glue, so that in future a better lay down paint. When the glue dries, you can apply any paint for walls. This may be dispersion paint with a matte and satin surface (resistant to washing and abrasion) or acrylic paint, forming a brilliant, strong abrasion surface.You can use latex paint and polyurethane varnish-paint. Paint, of course, be applied with a roller.

Choose shade - the design point in this kind of decoration. Often the walls in a room painted in different colors, or applied to the monotonous surface of the great simple drawing.

Glass fiber can withstand multiple painting which is also convenient. However, the thinner the structure and.smaller picture, the faster it is smoothed over several layers of paint. Thick fabric retain its structure.

Feedback from builders, decorators, certain inconveniences when working with steklooboyami arise in the process of cutting into strips. The reason for this is that even fibers of very high quality while cutting crumbles into small pieces. Therefore necessary to observe the following safety rules:

to color the work with the wallpaper to a long-sleeved clothing and gloves, and after pasting the premises to clean the air using a water filter to remove tiny particles of glass fibers and prevent them from entering the body.