Tips on drawing on the kitchen coating latex paint

Recently very popular water-dispersed or water-based paints. It is relatively inexpensive, easy to apply, and they are fast drying and resistant to moisture. In contrast to the lime wash these colors do not smear, even if you accidentally touches them.

Additionally, you can show imagination, experimenting with different combinations of colors, as water-based paints is mixed with pigment dyes.

However, it should take into account the purpose of the kitchen as a place of cooking, and, consequently, accumulation sealed, burning, scaling, etc. Under the influence of all these factors may change hue on the color surfaces.

Before you apply paint to the surface should be thoroughly cleaned from the ceiling of the old coating. Then repaired all the cracks and crack plaster, let it dry out and zagruntuyte surface of the ceiling. To dissolve the primer part of the paint with water in the ratio 2: 3. Then, after drying the primer, apply a thin layer of paint, and after 2 hours - the next.

Among the defects that may be formed on the surface after applying the paint, most often two.

First and foremost is the formation of drops and stains, which are obtained from the large amount of paint on the brush or roller. To remove it you clean the surface and then apply the paint.

The second flaw lies in the accumulation of paint on one site. His resolve the following way: clean off the paint and paint the surface lans. Only in this case should not hold a brush or roller with paint for a long time in one and the same place.
Modern industry produces ready-to-use water-based paints: white, superbelaya, interior, exterior. They differ in color filler and scope. White and superbelaya typically apply only to indoor facade is mainly used for exterior painting of buildings, fences, etc. The most high-quality interior paint, as is suitable for indoors and outdoors and can withstand large temperature changes.